When it comes to furniture refinishing Chicago home owners need to be certain about what is involved in the process. It is important to know how to go about the procedure since it could save one a lot of cash which would have been used in acquiring new items for the house. It is possible for the house owner to change the entire look of his apartment by merely altering the finish on the furniture pieces.
If the home owner has invested in quality furniture, he will discover that it is simple to renew the finish in order to create a different look. Some materials and tools will therefore be necessary to facilitate this process. Such can be found in the local DIY outlets or the specialist supplier at affordable rates.
During this process, the home owner needs to be much careful because he will be dealing with chemicals and materials that could be harmful when not properly handled. As a result, it will be essential to abide to all instruction given by the manufacturer of these products. In addition, the components should be put in places that are far from the reach of children and animals. There are also some guidelines provided to assist an individual through the entire process.
An individual should ensure that he sets aside adequate time for this task. The total amount of time that one may need for the task will depend on the kind of pieces to be worked on. The project should be tackled keenly with one handling a piece at a time so as to avoid messing up the work area. All the steps should be carefully followed.
There are various websites available online which could equip an individual with the necessary skills and know-how to undertake the project. From the guidelines offered in these sites, the home owner will discover that the initial step toward timber refinishing is to strip. Furniture may be finished with different products such as the lacquer, vanish or the shellac. It is essential to make sure that the stripper used is specifically meant for the finish that was applied.
Once all the old finish has been removed, it will be necessary to give the piece a good sanding. A quality orbital sander should be used. This should be done evenly and one should ensure that he does not gouge into the timber. After this has been established, it becomes easy to identify the difference when one applies the stain.
After staining the piece, it will be significant to seal it. Once this is done, what follows next is to apply the finish. All instructions given as far as this process is concerned must be followed to the latter. The products used for this purpose must also be compatible with the pieces being refinished.
The above are helpful tips on furniture refinishing Chicago home owners need to know. This is usually a fairly straightforward and simple process when properly followed. It is one among the easiest DIY tasks.
If the home owner has invested in quality furniture, he will discover that it is simple to renew the finish in order to create a different look. Some materials and tools will therefore be necessary to facilitate this process. Such can be found in the local DIY outlets or the specialist supplier at affordable rates.
During this process, the home owner needs to be much careful because he will be dealing with chemicals and materials that could be harmful when not properly handled. As a result, it will be essential to abide to all instruction given by the manufacturer of these products. In addition, the components should be put in places that are far from the reach of children and animals. There are also some guidelines provided to assist an individual through the entire process.
An individual should ensure that he sets aside adequate time for this task. The total amount of time that one may need for the task will depend on the kind of pieces to be worked on. The project should be tackled keenly with one handling a piece at a time so as to avoid messing up the work area. All the steps should be carefully followed.
There are various websites available online which could equip an individual with the necessary skills and know-how to undertake the project. From the guidelines offered in these sites, the home owner will discover that the initial step toward timber refinishing is to strip. Furniture may be finished with different products such as the lacquer, vanish or the shellac. It is essential to make sure that the stripper used is specifically meant for the finish that was applied.
Once all the old finish has been removed, it will be necessary to give the piece a good sanding. A quality orbital sander should be used. This should be done evenly and one should ensure that he does not gouge into the timber. After this has been established, it becomes easy to identify the difference when one applies the stain.
After staining the piece, it will be significant to seal it. Once this is done, what follows next is to apply the finish. All instructions given as far as this process is concerned must be followed to the latter. The products used for this purpose must also be compatible with the pieces being refinished.
The above are helpful tips on furniture refinishing Chicago home owners need to know. This is usually a fairly straightforward and simple process when properly followed. It is one among the easiest DIY tasks.
About the Author:
You can visit the website www.vincesfurnitureservice.com for more helpful information about Information About Furniture Refinishing Chicago
No comments:
Post a Comment