# Navbar-iframe { altezza : 0px ; visibilità : hidden ; Display : none }

How To Make A Dance Floor

By Joshua Morgan


A dance floor that is illuminated with LED is a structure that has panels of lights in the tiles that will light up with different wonderful colors. Even with the complexity of the structure, it is still made solely for dancing. Most illuminated floors are being lit by using LEDs. The colors are mainly blue, green and red. The floor itself is constructed of solid square cells and being tiled with acrylics or other tough glasses. The bottoms are reflective and the top will give the color. When it comes with Illuminated Dance Floors, there are many options that individuals can choose.

Get two pieces of plywood with the length and thickness. When being assembled side to side, the two sheets will have the right size when being used in homes where the room is being carpeted. If you wanted the floor easier to be moved or lighter, make it a little bit shorted than required.

Select the type of plywood. Plywood comes in various styles and types of thickness and wood class. They wood type does not really matter that much in the process. A proper thickness is ideal especially in place where there are other people living along side with you. If noise is not an issue, then choose a thicker class.

Attach both the sheets with a hinge. Putting a hinge will make it easier to move around and store it if not being used. A piano hinge is the most sufficient type because it can accommodate both the boards but attaching smaller ones in multiple sections will do the same. To fasten the hinges, use wood screws. The screws must be shorter than the plywoods thickness. Position the hinge where the board can rest side by side when being opened.

Choose a space that can seal the boards. The boards are huge and will require a good deal of space and area. The most convenient way is to lay them down flat on the tarp. It would be better to purchase horses as well. The board can be positioned on the top of the horses above the ground to catch any dripping from the sealant.

Choose a surface to put at the top of the subflooring. The subflooring will provide the necessary cushion to absorb any impact that is being caused by dancers. This will provide flexibility and elasticity and avoid injuries as well. There will still be a layer to be put on the top of the subflooring. Everything will depend upon the type of subflooring and the stiff middle layer should be accessible as well.

The trim must be glued down. Just use a wood glue to make sure the edges are being fastened in the corners. The half pieces should be put on the right side. After the glue has dried up, hammer the nails into the trim at least a foot apart. The nails must be driven slightly downwards.

Ask your loved ones and friends for consultation. They may have constructed in their own homes a dance floor or have purchased one and installed by the company. They can share their experiences and knowledge on how to properly install one.

Budgeting will be the most important factor. Individuals should know the different prices that companies and manufacturers are selling in the market nowadays. Make sure that the floor is within your budget range. However, if you want the new and improved type, it will be more costly.




About the Author:



No comments:

Post a Comment